Loading ...
Loading ...
Loading ...
25
18
BODY AND HAND POSITION (FIG. 18)
Never place hands near the cutting area. Proper
positioning of your body and hands when
operating the miter saw will make cutting easier
and safer. Keep children away. Keep all visitors
at a safe distance from the miter saw. Make sure
bystanders are clear of the saw and workpiece.
Do not force the saw. It will do the job better and
safer at its designed rate.
Operator and all by-standers must wear proper
safety goggles that comply with OSHA/ANSI
requirements Z87.1.
Starting a cut:
● Place hands at least 6-11/32 in. away
from the path of the blade – out of the
“no-hands zone.”
● Hold workpiece rmly against the fence to
prevent movement toward the blade.
● Turn the LED switch on for pre-alignment of
your cut.
● With the power switch OFF, bring the saw
blade down to the workpiece to see the
cutting path of the blade. Raise the saw
blade back up before turning the saw on.
● Squeeze trigger switch to start saw.
● Lower blade into workpiece with a rm
downward motion.
Finishing a cut:
● Hold the cutting arm in the down position.
● Release trigger switch and wait for all moving
parts to stop before moving your hands and
raising the cutting arm.
● If the blade doesn’t stop within 10 seconds,
unplug the saw and follow the instructions in
TROUBLESHOOTING.
Before freeing jammed material:
● Release trigger switch.
● Wait for all moving parts to stop.
● Unplug the miter saw.
WARNING
WARNING
No-hands
zone
6-11/32 in. 6-11/32 in.
Loading ...
Loading ...
Loading ...