Loading ...
Loading ...
Loading ...
Automatic Buttonhole (Continued)
Guide slot
(_ Guide block
(_ Buttonhole guide plate
(_ Buttonhole template
Catch
(_ Setting mark
_t_Gear
(_ Base plate
After you select a template @with the style and size of
buttonhole, slide the template into the guide plate (_. Pull
the catch @ toward you while sliding the template @ until
the selected buttonhole is at the setting mark_. Insert the
gear of base plate _ into the guide slot of template (_ and
fit the guide block_) into the center of the guide slot _).
S
J
_1_Needle thread
Bobbin thread
Buttonhole foot
Gear
@ Slot
Starting point
Attach the buttonhole foot (_. Adjust the position of gear(_
so it is aligned with the starting point of the template (_.
The lever can be used to change gear positions. Pull the
bobbin thread up through the guide slot of the buttonhole
guide plate by turning the handwheel counterclockwise
while holding the needle thread. Place the bobbin and
needle threads to the left side of the guide plate. Leave 3"
to 4" (7.0 to 10.0 cm) of thread.
J
J
9O
Loading ...
Loading ...
Loading ...