Loading ...
Loading ...
RF Radiation Exposure Statement
This equipment complies with FCC RF Radiation Exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
This transmitter must not be coqocated or operating in coniunction with any other antenna or transmitter.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
To comply with the FCC RF exposure compliance requirements, this device and its antenna must not be co-
located or operated in conjunction
The final device into which this transmitter module is installed must be labeled with the following statement:
"This device contains TX FCC ID: A3LDNUBS1 ." If this transmitter will be configured as a pc peripheral, it will be the
OEM's responsibility to obtain authorization as such (either through Certification of Declaration of Conformity) prior to
marketing of the device.
Readthese operating instructions carefully before using the
unit. Followall the safety instructions listed below. Keep these
operating instructionshandy for future reference.
1) Readthese instructions.
2) Keep these Instructions.
3) Heedall warnings.
4) Followall instructions.
5) Do not use this apparatus near water.
6)Clean only with dry cloth.
7) Do net block any ventilation openings. Installin accordance
with the manufacturer's instructions.
8) De not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers)that produce heat.
9) De not defeat the safety purpose of the polarizedor
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong areprovided for your safety. If the prodded plug
does not fi t into your outlet, consult an electricianfor
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptaclee, and the point
where they exitfrom the apparatus.
11) Onlyuse attachment/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart isused, use caution when
moving the cart/apparatus combination to
avoid injuryfrom tip-over.
13) Unplug this apparatus during lightning storms or when
unused fer long periods of time.
14) Refer all servicingto qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power supply cord or plug isdamaged, liquid
has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally,or has been dropped.
• Ensure that the AC power supply in your house complies
with the identification sticker located on the back of your
product.
• Installyour product horizontally, on a suitable base
(furniture),with enough space around it for ventilation (3-4
inches).
• Do net place the product on amplifiers or other equipment
which may become hot.
Make sure the ventilation slots are not covered.
• Do not stack anything on top of the product.
• Before moving the product, ensurethe Disc insert Hole is
empty.
• In order to disconnect the product completely from the
power supply, remove the main plug from the wail outlet,
especiallywhen left unused for a long period of time.
• During thunderstorms, disconnect the AC main plug from
the wall outlet. Voltage peaks due to lightning could
damage the product.
• Do net expose the product to direct sunlight or other heat
sources. This could lead to overheating and maJfuncfionof
the product.
• Protect the product from moisture, and excess heat or
equipment creating strong magnetic or electric fields (i.e.
speakers.).
• Disconnect the power cable from the AC supply if the
product malfunctions.
• Your product is not intended for industria] use. Use of this
product is for personal use only.
• Condensation may occur if your product or disc has been
stored in cold temperatures. Iftransporting the product
during the winter, wait approximately2 hours until the
product has reached room temperature before using.
• The batteries used with this product contain chemicals
that are harmful to the environment.
Do not dispose of batteries in the general household trash.
English 3
Loading ...
Loading ...
Loading ...