Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 89
TRI-FOLD TONNEAU COVER — IF EQUIPPED
The Tri-Fold Tonneau Cover can be installed on the
truck bed to protect your gear and cargo.
TRI-FOLD TONNEAU COVER REMOVAL
To remove the Tonneau Cover, use the following
steps:
1. Open the tailgate to gain access to the rear
pair of Tonneau Cover clamps located on the
underside of the cover.
Location Of Rear Latches
NOTE:
If clamp wire is damaged replace immediately.
2. P
ull both clamp handles down to release the
T
onneau Cover’s rear panel.
Released Position
3. From the Released Position, send the clamps
t
o the Stowed Position by pushing from the
yellow bumper upward.
Stowed Position
4. Fold the rear panel up onto the center panel
(
Intermediate Position).
Folded Rear Panel (Intermediate Position)
NOTE:
The vehicle cannot be driven when the Tonneau
Cov
er is in this position.
CAUTION!
Make sure the Tonneau Cover clamp and clamp
wire are in the proper stowed position. If the
clamp and clamp wire are not properly stowed,
damage to the Tonneau Cover material will
result.
2
Loading ...
Loading ...
Loading ...