Loading ...
Loading ...
Loading ...
SAFETY 323
Regular And Mega Cab Trucks:
In the regular cab truck, the top tether
anchorages are located behind the
c
enter and right passenger seats. In the
mega cab truck, the top tether
anchorages are located behind each rear seating
position. There is a plastic cover over each
anchorage. To attach the tether strap of the child
restraint:
1. Place the child restraint on the seat and
a
djust the tether strap so that it will reach
over the seat back, under the head restraint
and to the tether anchor directly behind the
seat.
Regular Cab Tether Anchorages
2. Route the tether strap to provide the most
d
irect path between the anchorage and the
child seat. The tether strap should go between
the head restraint posts underneath the head
restraint. You may need to adjust the head
restraint to the upward position to pass the
tether strap underneath the head restraint
and between its posts.
3. Lift the cover (if so equipped), and attach the
hook to the square opening in the sheet metal.
Tighten the tether strap according to the child
seat manufacturer’s instructions.
Crew Cab Trucks:
The top tether anchorages in this vehicle
are tether strap loops located between
t
h
e rear glass and the back of the rear
seat. There is a tether strap loop located
behind each seating position. Follow the steps
below to attach the tether strap of the child
restraint.
Right Or Left Outboard Seats:
1. R
aise the head restraint and reach between
t
he rear seat and rear glass to access the
tether strap loop.
Head Restraint In Raised Position
Tether Strap Loop With Center Head Restraint In Raised
Po
sition
1 — Tether Anchor
2 — Tether Strap Hook
3 — Tether Strap To Child Restraint
WARNING!
Never place a rear-facing child restraint in front
of an air bag. A deploying Passenger Front Air
Bag can cause death or serious injury to a child
12 years or younger, including a child in a
rear-facing child restraint.
6
Loading ...
Loading ...
Loading ...