Loading ...
Loading ...
Loading ...
84 GETTING TO KNOW YOUR VEHICLE
Each cleat must be located and tightened down in
one of the detents, along either rail, in order to
keep cargo properly secure.
To move the cleat to any position on the rail, turn
th
e nut counterclockwise several turns. Then pull
out on the cleat and slide it to the detent nearest
the desired location. Make sure the cleat is seated
in the detent and tighten the nut.
Adjustable Cleat Assembly
Cleat Removal (With Tonneau Cover)
To remove the cleats from the utility rail, remove
th
e end cap screw located in the center of the end
cap, using a #T30
Torx head driver. Remove the
end cap and slide the cleat off the end of the rail.
End Cap Screw Location With Tonneau Cover
Cleat Removal (Without Tonneau Cover)
Remove the end cap by pushing upward on the
r
e
lease button located beneath the end cap while
pulling the cap away from the rail. The cleat can
now be removed by sliding it off the end of the rail.
End Cap Release Button Without Tonneau Cover
Pull End Cap Away From Rail
RAMBOX — IF EQUIPPED
The RamBox system is an integrated pickup box
storage and cargo management system consisting
of up to three features:
Integrated box side storage bins
Cargo divider (if equipped)
Bed rail tie-down system (if equipped)
Ú page 83
LOCKING AND UNLOCKING RAMBOX
Push and release the lock or unlock button on the
key fob to lock and unlock all doors, the tailgate
and the RamBox
Ú page 18. The RamBox storage
bins can be locked using the vehicle key. To lock
an
d unlock the storage bin, insert the key into the
keyhole on the push button and turn clockwise to
1 — Utility Rail Detent
2 — Cleat Retainer Nut
3 — Utility Rail Cleat
Loading ...
Loading ...
Loading ...