Loading ...
Loading ...
Loading ...
258 MULTIMEDIA
AUX MODE
Overview
Auxiliary Mode (AUX) is entered by inserting an AUX
de
vice using a cable with a 3.5
mm audio jack into
t
h
e AUX port or pushing the MEDIA button on the
faceplate, and then selecting the Source button
and then the AUX button when a device is already
connected.
To insert an Auxiliary device, gently insert the
Au
xiliary device cable into the AUX port. If you
insert an Auxiliary device with the ignition and the
radio on, the unit will switch to AUX Mode and
begin to play.
Controlling The Auxiliary Device
The control of the Auxiliary device (e.g., selecting
p
laylists, play, fast forward, etc.) cannot be
provided by the radio; use the device controls
instead. Adjust the volume with the Volume button,
Volume/Mute rotary knob, or the On/Off rotary
knob, or with the volume of the attached device.
NOTE:
The radio unit is acting as the amplifier for audio
out
put from the Auxiliary device. Therefore, if the
volume control on the Auxiliary device is set too
low, there will be insufficient audio signal for the
radio unit to play the music on the device.
Seek Up /Seek Down
In USB Mode, press the Seek Up button on the
t
ou
chscreen for the next selection on the USB
device. Press and release the Seek Down button
on the touchscreen to return to the beginning of
the current selection, or to return to the beginning
of the previous selection if the USB device is within
the first three seconds of the current selection.
In Bluetooth® Mode, press and release the Seek
Up
button on the touchscreen for the next
selection on the Bluetooth® device. Press and
release the Seek Down button on the touchscreen
to return to the beginning of the current selection,
or return to the beginning of the previous selection
if the Bluetooth® device is within the first second
of the current selection.
Browse
In USB Mode, press the Browse button on the
tou
chscreen to display the browse window. In USB
Mode, the left side of the browse window displays
a list of ways you can browse through the contents
of the USB device. If supported by the device, you
can browse by Folder, Artist, Playlist, Album, Song,
etc. Press the desired button on the touchscreen
on the left side of the screen. The center of the
browse window shows items and its sub-functions,
which can be scrolled through by pressing the Up
and Down buttons to the right. The Tune/Scroll
knob can also be used to scroll.
On the Uconnect 3 With 5-inch Display, rotate the
Br
owse button on the faceplate to scroll through
and select a desired track on the device. Press the
Exit button on the touchscreen if you wish to cancel
the Browse function.
Media Mode
In USB Mode, press the Media button on the
t
ouchscreen to select the desired audio source:
USB.
In Bluetooth® Mode, press the Media button on
th
e touchscreen to select the desired audio
source: Bluetooth®.
In AUX Mode, press the Media button on the
tou
chscreen to select the desired audio source:
AUX.
Repeat
In USB Mode, press the Repeat button on the
t
ouchscreen to toggle the repeat functionality. The
Repeat button on the touchscreen is highlighted
when active. The Radio will continue to play the
current track, repeatedly, as long as the repeat is
active. Press the Repeat button again to enter
Repeat All. The radio will continue to play all the
current tracks, repeatedly, as long as the repeat
function is active. To cancel Repeat, press the
Repeat button a third time.
Loading ...
Loading ...
Loading ...