Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 79
3. Position the tailgate on a 45 degree angle.
4. Raise the right side of the tailgate until the
r
ight side pivot clears the hanger bracket.
5. Slide the entire tailgate to the right to free the
left side pivot.
6. Remove the tailgate from the vehicle.
NOTE:
Do not carry the tailgate loose in the truck pickup
box
.
Disconnecting The Rear Camera And
Remote Keyless Entry
1. Open the tailgate to access the rear camera
or Remote Keyless Entry connector bracket
located on the rear sill.
Connector Bracket
2. Remove the connector bracket from the sill by
p
ushing inward in the locking tab.
Locking Tab
3. Disconnect the chassis wiring harness,
e
nsuring the connector bracket does not fall
into the sill.
Disconnected Harness
4. Connect the chassis plug and bracket
(
provided in the glove compartment) to the
chassis wiring harness and insert the bracket
back into the sill.
Chassis Wiring Harness
WARNING!
To avoid inhaling carbon monoxide, which is
deadly, the exhaust system on vehicles
equipped with “Cap or Slide-In Campers” should
extend beyond the overhanging camper
compartment and be free of leaks.
2
Loading ...
Loading ...
Loading ...