Loading ...
Loading ...
Loading ...
SPS5000X Series User Manual
WWW.SIGLENT.COM 91
Troubleshooting
The following lists the power supply in the use of the process of possible failures
and troubleshooting. When you encounter these faults, please follow the
corresponding steps to deal with them. If you can't handle them, please contact
siglent in time.
A. If the power on key is pressed, the power supply is still black, and there is
no display:
➢ Check whether the power connector is connected properly.
➢ After checking, please restart the power supply.
➢ If the power supply can not be started normally, please contact
SIGLENT.
B. No voltage output by output
➢ Check whether the voltage and current settings are correct
➢ Check whether the supply is in host mode, whether EXT on/off is in the
off state, Volt_ctrl and Curr_ctrl are in Local state, whether the output
resistance is set properly, whether the output delay time is too large,
and the slope mode setting is too small, which causes the output voltage
to rise slowly.
➢ Use the default setting to reset the voltage and current output after
restoring the factory settings.
➢ If the power supply still cannot be used normally, please contact
SIGLENT.
Loading ...
Loading ...