Loading ...
Loading ...
Loading ...
SPS5000X Series User Manual
WWW.SIGLENT.COM 55
Press the knob in the interface, turn the knob to switch the Off/On options, press
the knob to confirm and the setting takes effect.
Set CC/CV Priority
The SPS5000X operation mode can be set to select CC high-speed priority, CC
slope priority, CV high-speed priority, and CV slope priority. High-speed priority
makes the voltage and current change at the fastest rate, and slope priority
makes the power supply change in voltage and current at a specified slope.
Setting method: Menu → 3.Operating Mode to proceed to the next submenu
interface.
Press the knob to enter the 1.Mode interface , and you can select the CC/CV
mode. After pressing the knob, turn the knob to switch between CC or CV. Press
the knob to confirm and the setting takes effect. When CC is displayed, it
means that it is currently in CC mode. Press Esc to return to the previous
menu.
Turn the knob to 2.Priority mode and press the knob to enter, you can set the
mode as high-speed priority or slope priority. The setting method is the same
as above, and the setting takes effect after pressing the knob to confirm. When
High Speed is displayed, it means that the current mode is high-speed priority
mode, and the slope cannot be edited in this mode. Press Esc to return to
the previous menu.
When set to slope priority mode, press the knob to enter the 3.Slew value
interface, you can set the voltage rise/fall slope or current rise/fall slope.
Loading ...
Loading ...
Loading ...