Loading ...
Loading ...
Loading ...
SPS5000X Series User Manual
WWW.SIGLENT.COM 66
Users can also use Sockets to communicate with SPS5000X based on the
TCP/IP protocol through the network port. Socket communication is a basic
communication technology of computer networks, which allows applications to
communicate through network hardware and standard network protocol
mechanisms built into the operating system. This method requires two-way
communication between the instrument and the computer network through an
IP address and a fixed port number.
The port of SPS5000X for Socket communication is 5025.
After connecting the SPS5000X (via the LAN interface on the rear panel) to the
local area network where the computer is located with a network cable, the user
can combine SCPI commands for custom programming to realize remote
control of the SPS5000X. For more information, please refer to the
programming examples.
Grammatical Conventions
SCPI commands are a tree-like hierarchical structure, including multiple
subsystems. Each subsystem is composed of a root keyword and one or
several hierarchical keywords. Command keywords are separated by colons ‘: ’,
keywords are followed by optional parameter settings, commands and
parameters are separated by ‘spaces’, for multiple parameters, parameters are
separated by commas‘, ’. A question mark ‘?’ is added after the command line,
which means to query this function.
Most SCPI commands are a mixture of upper and lower case letters. Capital
letters indicate the abbreviations of commands, namely short commands. If you
want better program readability, you can use long commands. E.g:
Loading ...
Loading ...
Loading ...