Loading ...
Loading ...
Loading ...
SPS5000X Series User Manual
WWW.SIGLENT.COM 63
A voltage of 0~10V is used to control the full-scale current
output (0%~100%) of the instrument
External resistance control of the current output.
A resistance of 0kΩ ~ 10kΩ is used to control the full-scale
current output (0%~100%) of the instrument.
08
Current Monitor Output. Outputs the full-scale current
(0~100%) as a voltage (0V~10V).
10
Voltage Monitor Output. Outputs the full-scale voltage
(0~100%) as a voltage (0V~10V).
12
Common for status signals 14, 16, and18.
14
Turns on when CC mode is active. (photo coupled open
collector output)
16
Turns on when CV mode is active. (photo coupled open
collector output)
18
Turns on when any of the protection modes are tripped (OVP,
OCP) or if a shutdown signal is received. (photo coupled
open collector output)
Communication interface settings
◆ USB
USB cannot be edited, only viewing operations can be performed.
Operation method: Menu → 3.Communication → 1.USB . After
entering the interface, you can view the resource information of the USB
device.
Loading ...
Loading ...
Loading ...