Loading ...
Loading ...
Loading ...
SPS5000X Series User Manual
WWW.SIGLENT.COM 62
03
Used when operating 2 or more units in parallel.
05
Current sum output signal when used in parallel mode.
07
Master unit current sum input signal from the first slave
CURRENT SUM OUTPUT. Used in parallel mode only.
09
Master unit current sum input signal from the second slave
CURRENT SUM OUTPUT. Used in parallel mode only.
11
Turns on when the output has been turned on. (photo
coupled open collector output)
13
Parallel control signal during master-slave parallel operation.
15
Turns the output on/off when (default setting) a low TTL
signal is applied.
Internally, the circuit is pulled up to +5 V with 10 kΩ
resistance.
19
Series slave input during master-slave series operation.
(40 V/80 V/160 V models only)
02
Control signal common. Connected to the sense terminal
when remote sense is used.
Connected to the negative output terminal when remote
sense is not used.
04
External voltage control of the voltage output.
A voltage of 0~10 V is used to control the full-scale voltage
output (0%~100%) of the instrument.
External resistance control of the voltage output.
A resistance of 0 kΩ ~ 10 kΩ is used to control the full-scale
voltage output (0%~100%) of the instrument.
04,02
When connecting the external voltage source to the MIL
connectors, use shielded or twisted paired wiring.
06
External voltage control of the current output.
Loading ...
Loading ...
Loading ...