Loading ...
Loading ...
Loading ...
SPS5000X Series User Manual
WWW.SIGLENT.COM 73
Set OCP switch state
Command format: SYStem:OCP:STATe {ON | OFF | 0 | 1}
Description: Set the ocp switch state of the selected channel
E.g: SYStem:OCP:STATe CH1, 1
Description: Set to open OCP function
Command format: SYStem:OCP:STATe? (CHn)
Description: Get the ocp switch status of the selected channel
E.g: SYStem:OCP:STATe? CH1
Response: 1\n
Set the voltage rise slope
Command format: [:SOURce]:VOLTage:RISE:SLOPe (CHn) ,{<value> | MINimum |
MAXimum |DEFault}
Description: Set the voltage rise slope value of the selected channel
E.g: :SOURce:VOLTage:RISE:SLOPe CH1,8
Description: Set the voltage rising slope of CH1 channel to 8V/s
Command format: [:SOURce]:VOLTage:RISE:SLOPe? (CHn)
Description: Get the voltage rise slope value of the selected channel
E.g: :SOURce:VOLTage:RISE:SLOPe? CH1
Response: 23.000000\n
Set the voltage drop slope
Command format: [:SOURce]:VOLTage:FALL:SLOPe (CHn) ,{<value> | MINimum |
MAXimum |DEFault}
Description: Set the voltage drop slope value of the selected channel
E.g: :SOURce:VOLTage:FALL:SLOPe CH1,8
Description: Set the voltage drop slope of CH1 channel to 8V/s
Command format: [:SOURce]:VOLTage:FALL:SLOPe? (CHn)
Description: Get the voltage drop slope value of the selected channel
E.g: :SOURce:VOLTage:FALL:SLOPe? CH1
Response:10.000000\n
Loading ...
Loading ...
Loading ...