Loading ...
Loading ...
Loading ...
SPS5000X Series User Manual
WWW.SIGLENT.COM 54
For other settings, refer to the single-channel output model method. During List
output, press the knob to pause the time, and press the knob again to continue
the output countdown.
3-channel List mode output example
Set OCP/OVP
Setting method: Menu → Configure → 1.Protect , enter the setting
interface. After pressing the knob, press the up and down direction keys to move
the cursor, select the knob to change the value, and press the knob to confirm
the setting takes effect.
OCP has added the switch OCP function option key. When it is displayed as
On , it means that the OCP function is on. Setting method: Press the knob on
the setting interface, move the cursor to the shadow overlay On/Off, turn the
knob to select On or Off, press the knob to confirm and the setting will take
effect. When the display is Off , it means that the OCP function is turned off
and the power supply will not trigger over-current protection.
Set Bleeder Resistor Control
Setting method: Menu → Configure → 2.Shunt , enter the setting interface.
Loading ...
Loading ...
Loading ...