Loading ...
Loading ...
Loading ...
SPS5000X Series User Manual
WWW.SIGLENT.COM 43
Output Port
Before connecting the output terminal to the load, consider the cable
specifications and the maximum voltage of the load. Connect the output
terminal and load line with M4 screw or M8 bolt (> 30A). If remote voltage
measurement is used, remove the connection terminals on S +, S - and output,
and connect the S +, S - detection lines to the load. For the most accurate power
delivery, connect the S+ and S- as close to the load as possible
Warning
The power switch must be turned off before installing
wiring at the power output terminal.
Otherwise, there may be a risk of electric shock.
The single-module model also has a front output port that can output a
maximum current of 10 A.
Warning
The front and rear outputs cannot be used at the same
time. When the front output is connected with the load,
the rear port should not be connected with the load.
Loading ...
Loading ...
Loading ...