Loading ...
Loading ...
Loading ...
74
Figure 10-2 VCI Bluetooth Pairing Screen
To pair the VCI with the tablet via Bluetooth
1. Power on the tablet.
2. Connect one end of the main cable to the VCI's vehicle data connector.
3. Connect the other end of the main cable to the vehicle Data Link Connector
(DLC).
4. Tap VCI Manager on the MaxiSys Job Menu of the tablet.
5. Select VCI BT (short for VCI Bluetooth), from the connection mode list.
6. Toggle Bluetooth ON. The device will start searching for available units for
pairing.
7. Depending on the VCI you use, the device name may appear as “Maxi” suffixed
with the serial number. Select the appropriate device for pairing.
8. When paired successfully, the connection status reads as “Connected.”
9. After a few seconds, the VCI button on the system Navigation Bar at the bottom
of the screen will display a green badge, indicating that the tablet is connected
to the VCI.
10. To disconnect the device, tap the connected device again.
11. Tap Back icon on the top-left to return to the MaxiSys Job Menu.
NOTE
A VCI can be paired with only one tablet at a time, and once it has been paired, the
device will not be discovered by any other unit.
Loading ...
Loading ...
Loading ...