Loading ...
Loading ...
Loading ...
29
Status Information Bar
The Status Information Bar at the top of the Main Section displays the following items:
1. Network Status Icon — indicates whether a network is connected.
2. VCI Icon — indicates the communication status between the tablet and the VCI.
3. Battery Icon — indicates the battery status of the vehicle.
Main Section
The Main Section of the screen varies depending on the stage of operations. The Main
Section can show vehicle identification selections, the main menu, test data, messages,
instructions, and other diagnostics information.
Function Buttons
The displayed Function Buttons at this section of the screen vary depending on the stage
of operations. They can be used to navigate, save or clear the diagnostics data, exit
scanning as well as make other functional controls. The functions of these buttons will
be introduced respectively in the following sections of the corresponding test operations.
Screen Messages
Screen messages appear when additional input is needed before proceeding. There are
mainly three types of on-screen messages as to their purposes: Confirmation, Warning,
and Error.
Confirmation Messages
These usually appear as an “Information” screen, which informs you when you are about
to perform an action that cannot be reversed or when an action has been initiated and
your confirmation is needed to continue.
When a user-response is not required to continue, the message appears briefly before
disappearing.
Warning Messages
These appear when completing the selected action may result in an irreversible change
or loss of data. The typical example for this is the “Erase Codes” message.
Error Messages
These appear when a system or procedural error has occurred. Examples of possible
errors include a disconnected cable or communication interruption due to certain reasons.
Loading ...
Loading ...
Loading ...