Loading ...
Loading ...
Loading ...
39
To edit the waveform color and line thickness in a data graph
1. Select a parameter in the waveform mode.
2. Tap the Edit button and an edit window will appear.
Figure 4-16 Waveform Edit Screen
3. The parameter is selected automatically in the left column.
4. Select a color from the second column.
5. Select a line thickness from the right column.
6. Tap Done to save the settings and exit, or tap Cancel to exit without saving.
NOTE
In full screen display mode, you can edit the waveform color and line thickness by tapping
the Edit button on the upper-right side of the screen.
Digital Gauge Mode — displays the parameters in the form of a digital gauge graph.
Trigger Settings
Tap the drop-down button to the right of a parameter to open a submenu. The Trigger
button is the last one in the submenu. Tap to display the Trigger Settings window.
On the Trigger Settings screen, you can set a standard range by filling in minimum and
maximum values. When exceeding these values, the trigger function will be executed
and the device will automatically record and save the generated data. You can review
the saved live data by tapping the Review button at the bottom of the screen.
Loading ...
Loading ...
Loading ...