Loading ...
Loading ...
Loading ...
37
Range Column — displays the range of the parameters.
Unit Column — displays the units of the parameter values. To change the Unit mode,
tap the Settings button in the top toolbar and select a required mode.
Display Mode
There are four display modes available for data viewing, allowing you to view various
parameters in the mode best suited to represent the data.
Tap the drop-down menu to the right of a parameter to open a submenu. A total of 7
buttons will be displayed: The 4 buttons on the left represent different data display modes,
plus an Information button (active when additional information is available), an Unit
Change button (for switching the unit of displayed data), and a Trigger button (tap to
open the "Trigger Settings" window).
Figure 4-14 Display Mode Screen
Each parameter displays the selected mode independently.
Analog Gauge Mode — displays the parameters in gauge charts.
Text Mode — the default mode that displays the parameters as a text list.
NOTE
Some status parameters, such as a switch reading like ON, OFF, ACTIVE, and ABORT,
can only be displayed in Text Mode. Others, such as a sensor reading, can be displayed
in both text and graph modes.
Waveform Mode — displays the parameters in waveform graphs.
In this mode, five control buttons will appear to the right of the parameter, allowing you
to manipulate the display status.
Loading ...
Loading ...
Loading ...