Loading ...
Loading ...
Loading ...
44
The main section of the Adaptation Operation screen displays a list of operational and
vehicle status information, which mainly consists of three parts:
1. The first part shows the preconditions or requirements for executing the operation
being selected.
2. The second part displays the current conditions of the vehicle control module being
learned for comparison to the preconditions suggested by the second part. If the
current condition of the control module is out of the suggested limit value, you must
adjust the vehicle condition to meet the requirement.
3. The last part displays the instruction of how to use the functional button at the lower
right corner of the screen to manipulate the teach-in operations.
Read the information carefully and check the vehicle condition accordingly, when you
are sure that the vehicle is ready to perform the adaptation, simply follow the instructions
provided to make appropriate selections. When the operation is done, an execution
status message such as Completed, Finished or Successful, displays.
Tap the ESC button to exit the function.
Programming and Coding
Since the introduction of OBDII and leading up to modern hybrids and EVs, computers
and software in cars have been expanding at an exponential rate. In-car software is
becoming one of the leading needs for service, and updating software may be the only
way to fix some of these issues:
Drivability
Fuel Efficiency
Power Loss
Fault Codes
Durability of Mechanical Parts
The Programming and Coding function is used to “re-flash” the vehicle control modules,
it allows you to update the computer software on the vehicle to the latest version, as well
as to reprogram adaptive data for certain components after making repairs or
replacements.
NOTE
The programming function can only be applied through connection with the J2534
programming device, which serves as a PassThru interface to establish communication
with and transfer data to the vehicle’s ECU.
Available programming or coding operations vary by the test vehicle, and only the
available operations display in the menu.
Loading ...
Loading ...
Loading ...