Loading ...
Loading ...
Loading ...
34
Caring for your device
ANOMALIES AND SOLUTIONS
"Auto Stop" is displayed (Auto Stop system).
This function cuts the heating of the oven in case
of forgetting. Put your oven on OFF.
Fault code starting with an "F".
Your oven has detected a disturbance. Turn the
oven o for 30 minutes. If the fault is still present,
cut o the power supply for at least one minute. If
the fault persists, contact the After-sales Service.
The oven does not heat up.
Check if the oven is properly connected or if the
fuse in your installation is not out of order. In-
crease the selected temperature.
The oven light does not work.
Replace the bulb or fuse. Check if the oven is pro-
perly connected.
The cooling fan continues to run when the
oven stops.
This is normal, the ventilation can operate up to
one hour after cooking to lower the interior and
exterior temperature of the oven. Beyond one
hour, contact the After Sales Service.
Cleaning by pyrolysis is not done.
Check that the door is closed. It could be a door
lock fault or the temperature sensor. If the fault
persists, contact the After-Sales Service.
The symbol ashes in the display.
Failure to lock the door, call the After-Sales Ser-
vice.
Vibration noise.
Check that the power cord is not in contact with
the rear wall.
This has no impact on the proper functioning of
your device but can nevertheless generate a vibra-
tion noise during ventilation. Remove your device
and move the cord. Replace your oven.
Loading ...
Loading ...
Loading ...