Loading ...
Loading ...
Loading ...
t
HM66 ENbook Page 46 Thursday February 23. 2006 2:49 PM
i i ii i _ ii i i
LEDindications
Tile yellow blue and red/green LED lights on tile TV (at tile bottom center of the TV) indicate tile TV's status, as described below:
Note: tf the TV loses A/C power (e.g., a power outage occurs or the power cord is unplugged), when power is restored, the yellow
LED will blink while the TV is booting until the remote control is usable. This is normal and is not a sign of malfunction.
TV front
Iiiil'LAMP OWER
HI L?__??
B_ YelbwLED BlueLED Red/GreenLED
"Voice announce" feature
When certain non-standard conditions occur, the LEDs on
the TV will blink and the TV will play a recorded
"voice announcement" describing the condition (see the
table below for the specific conditions that include a voice
announcement).
To repeat the voice announcement and hear additional
information, press the MENU button on the TV while the
LEDs are blinking.
The TV is operating
properly.
In LPS mode (standby
with Quick Restart ON).
The lamp is not working
properly.
See "Setting the Quick Restart TM feature" (_ page 20). -
The TV will automatically try to restart itself eight times
(see item #4).
Note: If the TV is powered off and then quickly on again
when the lamp unit is hot, it may take several minutes
for the picture to appear on-screen. This is a property of
DLP TV lamp technology and is NOT a sign of
malfunction. For details, see "Setting the Quick
Restart TM feature" and "IMPORTANT NOTICE ABOUT
HOT LAMP RESTART" (_. page 21).
_i_
4) Yellow is ON The lamp is not working Turn the TV OFF and then ON again. If the problem
(solid). Red blinks, properly after the eighth "Lamp not
automatic restart (see persists, contact Consume Solutions at working"
1-800-631-3811.
item #3).
5) Yellow is ON The lamp unit door is not Turn OFF the TV and unplug the power cord. Review "Lamp door is
(solid). seated properly. "Lamp unit replacement and care" in Chapter 8 to
ensure that the lamp door is installed securely, open."
Fan stopped
(light engine).
6) Red blinks.
7) Blue is ON (solid).
Green blinks.
8) Blue blinks slowly.
9) Blue blinks quickly.
10)Blue blinks quickly.
Red blinks.
11)Blue blinks quickly.
Yellow blinks.
Red blinks.
Fan stopped (POD).
Turn OFF the TV and unplug the power cord. Plug the
power cord in again and turn ON the TV.
Turn OFF the TV. Check to make sure all slots and
openings in the TV cabinet are not covered, blocked, or
dusty. Turn ON the TV again.
Abnormal operation of
BUS line.
Power Protect
Detection.
The color wheel has
stopped.
An abnormal
temperature increase
has occurred.
"Fan
stopped."
"Fan
stopped."
"Color wheel
stopped."
"Temperature
warning."
If! after trying solutions, the problem still exists:
• In the U.S., call TACP Consumer Solutions at 1-800-631-3811.
• In Canada, locate the nearest Toshiba authorized service depot by directing your web browser to www.toshiba.ca; click
"Home Entertainment," and then click "Support."
46
HM66 (E/F) Web 213:276
Loading ...
Loading ...
Loading ...