Loading ...
Loading ...
Loading ...
Clock and Timer
Wall Oven
CEEE) _ CSED
[_ ON PREHEAT
UPPER OVEN
CLOCK COOK f
Go oT'ME[TIMER START
Q O O T'ME,
CEED CEE_ CEEE)
PREHEAT ON
LOWER OVEN
G SET
MANUAL
Double oven clock and timer
CLOCK COOK I
Q O O TIME
TIMER START
GO O TIME
MANUAL
0 _ TIMED @
G SET Q
Ov
Single oven clock andtimer
Using the
clock and
timer
_'_ lleIl _Otl tiI'st ttu'n on tile powei" to Votu" o',en
or after a power failure, tile display will show
all 8's, then dashes and the set clock s_mbol.
To set or chmage the time of day, press the
CI,OCK button. The control will beep. The set
clock swnbol will appear in the display.
Press the increase "A" or decrease "V" button.
If the increase "A" or decrease "V" button is
pressed and released, it will change the time in
one minute increments. If the increase "A" or
decrease "V" button is pressed and held, the
time will change in 10 minute increments.
Once the clock is set, press the CI,OCK button
again. The control will beep and the set clock
swnbol will disappear.
To check the time of day when the timer is in
use press the CI,OCK button. The time of day
will be displayed briefly and then will return to
the timer fimction.
The timer button does not control oven
fm_ctions. The timer may be used as a
convenient kitchen timer.
To set, press the TIMER button. The control
will beep. The displa} will show ":00" and the
words SET TIMER.
Press the increase "A" or decrease "V" button
to set the amount of time desired.
If the increase "A" or decrease "V" button is
pressed and released, it will change the time in
one minute increments. If the increase "A" or
decrease "V" button is pressed and held, the
time will change in 10 minute increments.
The timer will start after approximately 4
seconds. The colon blinks when the timer
starts counting down. The word TIMER will
remain in the display during the countdown.
The timer will count down in minutes until the
last minute, then it will count down in seconds.
When timing is complete the word TIMER
will blink and the control will beep three
times. The display will return to the time of
day or any active programmed traction and
the control will beep twice every 10 seconds
until any button is touched.
To cancel the timer, press the TIMER button
once. If no time is set, the timer cancels itself
after approximately 5 seconds. The time of day
is then displayed.
Loading ...
Loading ...
Loading ...