Kenmore 79048973810 Official Elite Electric Wall Oven

User Manual - Page 33

For 79048973810.

PDF File Manual, 43 pages, Download pdf file

Loading ...
Loading ...
Loading ...
33
Oven Controls
To turn the oven off and keep the Sabbath feature active:
Press .
To turn off the Sabbath feature:
Press and hold both
Cook Time and Delay Start keys simultane-
ously for at least 3 seconds to turn the Sabbath feature off. The
control will provide an acceptance tone, and SAb will disappear
from the display. The oven is no longer programmed for the
Sabbath feature.
What to do during a power failure or power interruption after
the Sabbath feature has been activated:
Should you experience a power failure or interruption, the oven
will shut-off. When power is restored the oven will not turn back
on automatically. The oven will remember that it is set for the
Sabbath, and the oven display will show the message
SF for
Sabbath failure.
The food may be safely removed from the oven while still in the
Sabbath feature, however the oven cannot be turned back on
until after the Sabbath/holidays. After the Sabbath observance
turn off the Sabbath feature. Press and hold both
Cook Time
and
Delay Start keys for at least 3 seconds simultaneously to
turn the Sabbath feature off. SF will disappear from the display,
and the oven may be used with all normal functions.
Adjusting Oven Temperatures
Your appliance has been factory calibrated and tested to ensure
accurate baking temperatures. For the first few uses, follow your
recipe times and temperature recommendations carefully. If you
think the oven is cooking too hot or too cool for your recipe
times, you may adjust the control so the oven cooks hotter or
cooler than the oven temperature displayed.
The oven temperature may be increased as much as +35°F
(+19°C) or decreased -35°F (-19°C) from the factory calibrated
settings.
To increase (+) or decrease (-) the oven temperature by 20°F:
1. Press Upper Oven or Lower Oven key.
2. Press and hold Bake until the control produces an audible
tone (about 6 seconds). The factory offset temperature of 0
(zero) should appear in the display.
3. Enter 2 0 using number keys.
4. Press Self Clean to toggle between plus (+) if increasing
temperature or minus (-) if decreasing the temperature.
5. Press to accept change.
Important note:
Oven temperature adjustments made will not change the
Broil or Self Clean function temperatures.
If the temperature shows an adjustment of -20°F, and a
+20°F adjustment is needed, you can toggle between the
minus (-) or plus (+) in the display when pressing Self Clean
key (See Step 4).
Do not use oven thermometers such as those found in
grocery stores to check the temperature settings inside your
oven. These oven thermometers may vary as much as 20°F
to 40°F degrees from actual temperatures.
The oven temperature adjustment may be made if your
oven control has been set to display °C temperatures.
Minimum and maximum settings for °C range from plus (+)
19°C to minus (-) 19°C.
Restoring Factory Default Settings
When new, your appliance left the factory with predetermined
(default) oven control settings. Over time, users may have made
changes to these settings. The following options may have been
modified since the appliance was new:
12 or 24 hour display mode
Continuous bake or 12 hour energy savings mode
Silent or audible control
Oven temperature display (°F or °C)
Oven temperature adjustments
Meat probe Cancel or Continue Cooking
To restore oven control to factory default settings:
If you choose to restore factory default setting
using this method, all of the above user settings will be restored
to the factory default settings. This includes the oven tempera-
ture offset that will reset to (0) zero.
1. Press and hold 7 until acceptance tone sounds (about 6
seconds).
2. Press . The control has been reset with the default
settings.
Loading ...
Loading ...
Loading ...