Kenmore 79048973810 Official Elite Electric Wall Oven

User Manual - Page 15

For 79048973810.

PDF File Manual, 43 pages, Download pdf file

Loading ...
Loading ...
Loading ...
15
Oven Controls
Setting the Clock
When the appliance is first powered on, 12:00 will flash in the
display. The time of day must first be set before operating the
oven.
To set clock for 1:30:
1. Press .
2. Enter 1 3 0 using number keys.
3. Press .
Important note:
The clock cannot be changed when a Cook Time, Self Clean,
Delay Start, or cooking feature is active.
Setting Timer
The minute timer allows you to track your cooking times without
interfering with the cooking process. The timer may be set from
a minimum time of 1 minute to a maximum of 11 hours and 59
minutes.
To set timer for 5 minutes:
1. Press Timer
ON/OFF.
2. Enter 5 using number keys.
3. Press Timer ON/OFF again. When the time runs out, END
appears in the display and the control will beep three times
every 30 seconds until
Timer ON/OFF is pressed.
To cancel the timer when active, press
Timer ON/OFF again.
Important:
The timer does not start or stop the cooking process. It
serves as an extra minute timer that will sound an alert tone
when the set time has run out. The timer may be used alone
or while using any of the other oven functions.
When the timer is set for more than 1 hour it will display
hours and minutes until 1 hour remains. When less than
1 hour remains, the display counts down in minutes and
seconds. With less than 1 minute remaining, only seconds
will display.
If the timer is active during a cooking process, the timer will
show in the display. To view the status of any other active
oven function, press the key of the cooking function once
and it will appear in the display for a few seconds.
Setting 12 or 24 Hour Display Mode
The clock display mode allows you to choose between the 12 or
24 hour modes. The factory pre-set clock mode is 12 hours.
To set 12 or 24 hour display mode:
1. Press and hold for 6 seconds.
2. Press Self Clean to toggle between 12 Hr day or 24 Hr day
display modes.
3. Press to accept choice.
Changing Between Continuous Bake Setting or 12 Hour
Energy Saving Feature
The oven control has a factory preset 12 hour energy saving
feature that will turn off the oven after 12 hours. The control may
be programmed to bake continuously.
To change between continuous bake or 12 hour energy saving
feature:
1. Press and hold Timer
ON/OFF for 6 seconds until 12 Hour
OFF or Stay On appears.
2. Press Self Clean to toggle between 12 Hour OFF or Stay On
feature.
3. Press to accept choice.
Important note: When cooking Sous Vide you may need to turn
off the oven energy saving feature based on cooking time. See
Sous Vide section to determine.
Loading ...
Loading ...
Loading ...