Loading ...
Loading ...
Loading ...
Installation Instructions
[] ELECTRICAL CONNECTIONS (CONT.)
B. Usage Situations where Applim_ce Power Cord will be
Discommcted Frequently.
Do not use an adapter plug ill tl_ese situations because
disconnecting oI tim power cord places undue strain on
tl_e adapter and leads to eventual fifilure of the adapter
ground temfinal. The cllstomer should have the 2-prong
wall receptacle replaced with a tl_ree-prong (grounding)
receptacle by a qualified electrician before using the
appliance.
The installation ot appliances designed tor mobile home
installation llltlSt COlltk)lIl/ with the Manufilctured
Home Construction and Safe_' Standard, Title 24 CFR,
Part 3280 (fimnerly the Federal Standard tilt +Mobile
Home Construction and Satet,i, Title 24, HUD, Part 280)
oI; when such standard is not applicable, the Standard
fi)r Manufi_cmred Home Installations, latest edition
(Manuti_ctured Home Sites, Connnunities and Set-Ups),
ANSI A225.1, latest edition, or with local codes. Ill
Canada, mobile home installation llltlst be ill accordance
with the current CAN/CSA Z240/MH Mobile Home
Installation Code.
Eleclric Disconnect
• I,ocate disconnect plug on tl_e range back.
• Pinch sides ot connector and pull otlt of range back.
[] SEAL THE OPENINGS
Seal any openings ill the wall behind the range and ill
tl_e floor under tl_e range when hookups are completed.
[] CHECK IGNITION OF SURFACE
BURNERS
Operation of all cooktop and oxen burnei3 shouM be
checked after file range and gas suppl) lines hme been
caIefitlh checked fi)r leaks,
F]ectric Ignition Models
Select a top burner knob and simultaneous]) push ill and
turn to LITE position. "_Luwillhear a clicking sound
indicating proper operation of file spark module. Once file
air has been purged from the supp b lines, burnei_s shouM
ligJlt wiflfin 4 seconds, After burner lights, rotate knob out of
file LrI_ positkm, Tr_ each burner ill succession until all
btlrnefs hme been checked,
Quality of Flames
The combustion qualit\ of burner flames needs to be
determined visualh
(A) Yellow flames--
Callfor service
(B) Yellow tips on
outer cones--
Normal for LP gas
(C) Soft blue
flames--Normal for
natural gas
If burner flames look like (A), call for service. Normal
burner flames should look like (B) or (C), depending
on the type of gas you use.
With 12 gas, some yello_ tipping on outer cones is normal.
[] CHECKIGNITION OF OVEN BURNER
The oxen is desig_led to ot)eram quiet]) and m_tomafical]y.
To ot)erate the oxen, t)ress the BAKE pad mitt then t)ress file
number pads until 350 ° at)t)eai_ ill file display. Touch the
START/ON pad. After 30-90 seconds, the oven burner will
ig_fim and burn until the set mmpeIature is reached. The
o_en burner will continue to cycle on and off as necessary to
maintain the oxen at the mml)erature indicamd b) the disl)la )
To check ig_fition of the broil burnei, touch the BROIL
HI/LO pad and then the START/ON pad. After 30-90
seconds, the broil burner will ig_fim.
Electric ignition models require electrical power to ot)eram.
Ill c_tse of a p(_wer outage, the oxen burnei_ on these models
cannot be lit manualh with a match. Gas will not fl()w unless
the glow bin" is hot.
If the oxen is ill use when a power outage occm% the btlrner
will shut off and cannot be re-lit until power is restored.
41
Loading ...
Loading ...
Loading ...