Loading ...
Loading ...
Loading ...
Installation Instructions
-&WARNING!
ANTI-TIP DEVICE
@
®
All ranges can tip and injury could result.
To prevent accidental tipping of the rm_ge,
attach ml approved AJlfi-Tip device to the
wall. (See Installing the Anti-tip Device in this
section.) To check if the device is hastalled
mid engaged properly, cm'efully tip the rm_ge
forward. The Anti-Tip device should engage
mid prevent the rm_ge from tipping over.
If you pull the rm_ge out from the wall for
rely reason, make sure the Anti-Tip device
is engaged when you push the range back
against the wall.
• For your safety, never use your range for warn/ing
or heating tile roon/. Your oven and cooktop are
not designed to heat your kitchen. Top burners
should not be operated without cookware Oil the
grate. Such abuse could result in fire and dan/age
to your range and will void your warranm
• Do not store or use conlbustible inatei_ials,
gasoline or other flanunable wq_oi's and liquids
in the vicinity of this or any other ai)pliance,
Explosions or fires could result.
• Do not rise ()veil tor a storage area. ]teil/S stored in
the ()veil can ignite.
• Do not let cooking grease or other flan/nlable
nlaterials accunlulate in or near the range.
LOCATION
Do not locate the range where it may be subject to strong
drafts. Any openings in the floor or wall behind the rmlge
should be sealed. Make sure the opelfings around the
base of the rm_ge that supply fresh air for combustion
mid ventilation axe not obs_'ucted by carpeting or
woodwork.
Your range, like nlanv other household iteins, is hea\ T
and can settle into soft floor coverings such as cushioned
vinyl or caipeting. Use care when nloving tile range
on this type (ff flooiing. It is reconmlended that the
following siinple and inexpensive instructions be
followed to protect your flooi:
The range should be installed on a sheet (ff plywood
(or sinlilar inateiJal). _._]/en the floor coveiJng ends at
the ti'ont of the range, the area that the range will rest
on should be built up with plywood to the sanle level or
higher than the floor covering,
This will allow the range to be moved fi3I"cleaning
or seIvicing. _Mso, nlake sure your floor coveting will
withstnnd 180°E (See the Installation Safe_ Instructions
section.)
Make sure the wall coveiJngs around your range can
withstnnd tile heat generated (up to 200°F) by tile range.
(See the Installation SafeW Instructions section.)
IMPORTANT!
Remove all tape and packaging. Make sure the burners
are properly seated and level.
Lift up the cooktop (on models with standard twh_
burners) mid remove any packing material under it.
Take the accessory pack out of the oven mid/or th'awer.
Check to be sure that no rm_ge pm'ts have come loose
during shipph_g.
35
Loading ...
Loading ...
Loading ...