Loading ...
Loading ...
Loading ...
80
Parameter Description
File Size
Enter the size of the uploaded recorded video.
If the entered size is less than the recorded video size, only a section of the
recorded video can be uploaded.
If the entered size is more than the recorded video size, the whole recorded
video can be uploaded.
If the entered size is 0, the whole recorded video will be uploaded.
Choose
channel
Select the channel that you want to apply the FTP settings.
Weekday
Select the week day and set the time period that you want to upload the
recorded files. You can set two periods for each week.
Select the record type (Alarm, MD, and General) that you want to upload. After
selecting the corresponding recording type next to the corresponding period,
the selected recording type will be uploaded during the configured period.
Period
Picture Upload
Interval
When the Snapshot Type is Schedule, the upload method should be
determined based on the image upload interval and snapshot interval.
If this interval is longer than snapshot interval, the system uploads the
most recent snapshot. For example, if the interval is 5 seconds and
snapshot interval is 2 seconds, the system sends an upload command
to upload the next snapshot every 5 seconds.
If this interval is shorter than snapshot interval, the system uploads the
snapshot per the snapshot interval. For example, if the interval is 5
seconds and snapshot interval is 10 seconds, the system uploads the
snapshot every 10 seconds.
When the Snapshot Type is Event, the system uploads the snapshot as per
the snapshot interval.
You can change the Interval and Type. For details, see “5.4.2.2 Snapshot”.
Click Test to test if the FTP/SFTP server is successfully configured.
The system pops up a message to indicate success or failure.
If failed, please check the network connection or configurations.
Click OK.
Configuring System
You can configure system information, including serial port parameters, security management, and
vehicle information.
5.7.1 Configuring Serial Port Parameters
You can configure the serial port parameters such as baud rate, data bit, stop bit, and parity.
Select Setting > System > Serial Port.
The Serial Port interface is displayed. See Figure 5-39.
Loading ...
Loading ...
Loading ...