Loading ...
Loading ...
Loading ...
28
Parameter Description
Interval
1. In the Timing Mode list, select NTP to enable the NTP timing function.
2. Configure parameters.
Server: Enter IP address of NTP server.
Synchronize: Click Manual Update to sync the device time with NTP
server.
Port: The system supports TCP protocol only and the default setting is
123.
Interval: Enter the interval that you want the device to sync time with
the NTP server. The maximum value is 65535 minutes.
Click OK.
Configuring Record Mode
The record mode is consisted of manual mode and auto mode. You can also enable or disable the
snapshot function.
Auto: The recording starts automatically according to the record type and recording time as
configured in the recording schedule.
Manual: Keep general recording for 24 hours for the selected channel.
Manual recording operation requires the user have the permission to access Storage Settings.
Check to ensure the HDD installed in the device has been formatted properly.
Select Setting > Storage > Record Mode.
The Record Mode interface is displayed. See Figure 3-13.
Record Mode
Configure parameters. For details, see Table 3-5.
Loading ...
Loading ...
Loading ...