Loading ...
Loading ...
Loading ...
100
The system pops up the reboot message. Click OK, the system starts importing the
configurations and reboot the device after importing is completed.
7.4.3 Restoring to Default
You can restore the system to default configurations or the factory default. Only the user with the
default & upgrade authorities can do this.
The corresponding functions will be restored to the factory settings, and your current configurations
will be lost. Proceed with caution.
Select Setting > System > Default.
The Default interface is displayed. See Figure 7-9.
Default
Select the check box of the options that you want to restore to the factory default.
Default: Click Default, and the Reboot dialog box is popped up. See Figure 7-10. Then
click OK. All configurations other than user name, password, security questions, device
IP, 4G, Wi-Fi are restored to the default configuration of the device.
Factory Default: Click Factory Default, and the Reboot dialog box is displayed. See
Figure 7-11. Then click OK, and the system restarts. After the device is restarted, the
system will restore to factory defaults, and the device requires initialization again.
Proceed with caution.
When there is a user operating on the local interface, the factory default settings cannot
be performed until the local user log out.
Reboot (1)
Loading ...
Loading ...
Loading ...