Loading ...
Loading ...
Loading ...
Cleaningtheglass cooktop, w .OEAppli..oes.oom
Control Lockout (onsomemodels)
Begin by locking the cooktop;
see the Control Lockoutsection.
Cleanyourcooktopafter
eachspill
Normal Daily Use Cleaning
ONLY use the recommended cleaning
cream, Cerama Btyte ®,on the glass
cooktop. Other creams may not be as
effective.
To maintain and protect the surface of
your glass cooktop, fbllow these steps:
%
[]
Before using the cooktop for fl_e
first time, clean it with the cooktop
cleaning cream. This helps protect
the top and makes clean-up easier.
Daily use of the cooktop cleaning
cream _dll help keep the cooktop
looking new.
Shake the cleaning cream well.
Apply a few drops of the cream
directly to the cooktop.
_-] Use a paper towel or sponge to clean
the entire cooktop sudace.
NOTE:It isveryimportantthat youDONOT
heat thecooktopuntil it hasbeencleaned
thoroughly.
®
Scotch-Brite Multi-Purpose
No Scratch scrub sponge
Burned-On Residue
WARNIN& DAMAGEtoyourglasssurface
mayoccurif youusescrubpadsotherthan
BLUEScotch-Brite®Multi-PurposeNoScratch
scrubspongesby3M.
Allow the cooktop to cool.
Spread a few drops of Cerama
Bryte ®to the entire burned residue
area.
Using the scrub sponge, rub the
residue area, applying pressure as
needed.
If any residue remains, repeat the
steps listed above as needed.
_-] For additional protection, af_er
all residue has been removed,
polish the entire surface with
Cerama Btyte ®and a paper towel.
NOTE:Razor blade is packed
inverted for safety reasons. Prior to
use, the blade must be rotated and
reinsertefl into slot. Do not use a
duff or nicked blade.
TheRAZORSCRAPERis available
through our Parts Center.See
instructions under "ToOrderParts"
section on next page.
Heavy, Burned-On Residue
[Z] Allow the cooktop to cool.
Spread a few drops of Cerama
Btyte®to the entire burned residue
area.
@
Hold the razor scraper at
approximately a 45 ° angle against
the glass surface and scrape the
soil. It will be necessa U to apply
pressure to the razor scraper in
order to remove the residue.
@
@
%
Keep a small amount of cream on
the residue as you scrape.
After scraping with the razor
scraper, use the scrub sponge to
remove any remaining residue.
For additional protection, after all
residue has been removed, polish
the entire surface with Cerama
BtTte ®and a paper towel.
25
Loading ...
Loading ...
Loading ...