Loading ...
Loading ...
Loading ...
Usingtheclock andtimer, w OEApplia,oes.oom
Make sure the clock is setto the
correct time of day,
To Set the Clock
The clock must be set to the correct time
of day for the automatic oven timing
flmctions m work properly. The time of
day cannot be changed during a timed
baking or self-cleaning cycle.
[Z] Press the CLOCKpad.
[] Press the number pads.
I-j] Press the STARTpad.
The timer is a minute timer only,
The timer does not control oven
operations, Themaximum setting on
the timer is 9hours and59 minutes.
To Set the Timer
[-_ Press the KITCHENTIMERON/OFF
pad.
_-] Press the number pads until the
amount of time you want shows in
the displ W. For example, to set 2
hours and 45 minutes, press 2, 4
and 5 in that order.
If you make a mistake press the
KITCHENTIMERON/OFFpad and
begin again.
_-] Press the STARTpad.
_-] Vvqlenthe timer reaches :_, the
control will beep 3 times followed
by one beep eveU 6 seconds until
the KITCHENTIMERON/OFFpad
is pressed.
The6 secondtonecanbecanceledbyfollowing
thestepsin theSpecialfeaturesof youroven
controlsectionunderTonesat theEndofa
timedC/c/e.
To Reset the Timer
If the display is still showing the time
remaining, you may change it by pressing
the KITCHENTIMERON/OFFpad, then
press the number pads until the time you
want appears in the display.
If the remaining time is not in d_e display
(clock, delay start or cooking time are in
the display), recall the remaining time by
pressing the KITCHENTIMERON/OFFpad
and then pressing the number pads m
enter the new time you want.
To Cancel the Timer
Pressthe KITCHENTIMERON/OFFpad
twice.
13
Loading ...
Loading ...
Loading ...