Loading ...
Loading ...
Loading ...
44
©
2021 DJI All Rights Reserved.
AGRAS T10
User Manual
4. Omnidirectional Digital Radar Status
: shows the status of omnidirectional digital radar and the side obstacle detection distance. Tap to
enable or disable the radar and set the side obstacle detection distance in the pop-up menu. When
the radar is disabled, only the horizontal obstacle avoidance is disabled. Altitude stabilization is not
disabled.
5. RTK/GNSS Signal Strength
RTK
FIX
: this icon is displayed when RTK is enabled and works normally. On the upper right corner is
the number of satellites connected. One of the following three statuses is displayed above the RTK
icon: FIX indicates that the differential data calculation is completed and the aircraft can use RTK for
positioning. The aircraft can only take off in this status. FLOAT indicates that the system is calculating
the differential data. Wait for FIX to be displayed. SINGLE indicates that the differential data is not
obtained. Wait for FIX to be displayed.
: this icon is displayed when RTK is not in use. It shows the current GNSS signal strength and
the number of satellites connected.
6. RTK Connection Status
Icons displayed when using RTK data. The display varies when using the D-RTK 2 or Network RTK
Service.
: displays RTK signal strength when using the D-RTK 2.
: indicates that the connection with the D-RTK 2 is abnormal. Refer to the prompts in the app.
: displays RTK signal strength when using the Network RTK Service.
: indicates that the connection with the Network RTK server is abnormal. Refer to the prompts in
the app.
7. Control Signal Strength
: shows the signal strength of the connection between the aircraft and the remote controller.
8. Battery Settings
: shows the current battery level.
9. More Settings
Tap
to enter the extended menu to view and adjust the parameters of all other settings.
Aircraft Settings: includes setting the maximum altitude, maximum flight distance, connection
routing and RTH speed and altitude, action when tank is empty and operations complete, the
aircraft behavior and whether to abort operation when the remote controller signal is lost, home point
position, lamp brightness, and also advanced settings.
Spraying System Settings: includes the spraying system switch as well as setting the spray tank
level and empty tank warning threshold, calibrating the pump ow, ow meter, and nozzle model,
restoring the ow meter to factory settings, and whether to display spraying system data, empty tank
point, and ow meter error alerts.
RC Settings: includes linking and calibrating remote controllers, setting the control stick mode and
customizable buttons, and checking information of linked aircraft.
Radar Settings: includes setting altitude stabilization, horizontal obstacle avoidance, upward
obstacle avoidance, auto obstacle avoidance, side obstacle detection distance, obstacle distance
display, warning distance, attitude indicator transparency, attitude indicator size, task terrain, and
calibrating the detection angle.
RTK Settings: includes aircraft RTK positioning, RTK signal source and the corresponding
settings.
Loading ...
Loading ...
Loading ...