Loading ...
Loading ...
Loading ...
©
2021 DJI All Rights Reserved.
39
AGRAS T10
User Manual
Status LED Description
Solid Red The remote controller is not linked to an aircraft.
Solid Green The remote controller is linked to an aircraft.
Blinks Blue The remote controller is linking to an aircraft.
Blinks Red
The temperature of the remote controller is too high or the battery
level of the aircraft is low.
Blinks Yellow The battery level of the remote controller is low.
Blinks Cyan The control sticks are not centered.
Battery Level Indicators Battery Level
75%~100%
50%~75%
25%~50%
0%~25%
Remote Controller Warning Sounds
In scenarios where there is a warning, the remote controller will do so by vibrating and/or beeping. When
the controller beeps and the status LED is solid green, this error may be related to the aircraft or ight
status, and a warning will appear in DJI Agras. If this error is related to the remote controller, a warning
will appear on the screen of the remote controller.
To disable the beeping, power on the remote controller, swipe from the top of the screen, tap
, then
Sound, and adjust the notication volume.
Linking the Remote Controller
The remote controller is linked to the aircraft by default. Linking is only required when using a new
remote controller for the rst time. When using the Multi-Aircraft Control function, it is required to link all
aircraft to the same remote controller.
1. Power on the remote controller and open DJI Agras. Power on the aircraft.
2. Tap Execute Operation to enter Operation View and tap
, then . Tap Single Linking or Multi
Linking (if Multi-Aircraft Control is in use), and then tap Starting Linking. The status LED blinks blue
and the remote controller beeps twice repeatedly, indicating that the remote controller is ready for
linking.
3. Press and hold the power button on the Intelligent Flight Battery for ve seconds. The Intelligent Flight
Battery LEDs blink in sequence, indicating that the linking is in progress.
4. The Status LED on the remote controller glows solid green if linking is successful. If linking fails, enter
linking status again and retry.
5. Repeat Step 3 and 4 to complete linking between all the devices and the remote controller, if Multi
Linking is selected. When nished, tap End Linking.
Loading ...
Loading ...
Loading ...