Loading ...
Loading ...
Loading ...
36
©
2021 DJI All Rights Reserved.
AGRAS T10
User Manual
The table below is a summary for how to control the spraying system in different modes using the remote
controller.
Modes Spray Rate Dial Spray Button
FPV / Map Switch
Button
Button C1 Button C2
Route operation mode / / Switch the display Customizable Customizable
A-B Route operation mode / / Switch the display Customizable Customizable
Manual operation mode Adjust spray rate
Start or stop
spraying
Switch the display Customizable Customizable
Manual Plus operation mode Adjust spray rate / Switch the display Customizable Customizable
Field Planning / / /
Obstacle mode/
Waypoint mode
Add waypoint/
obstacle point
Flight Mode Switch
位置P
位置P
位置A
Position Flight Mode
P
P-mode (Positioning)
A
A-mode (Attitude)
P
P-mode (Positioning)
Position P
Position A
Position P
Regardless of the position the switch is in on the remote controller, the aircraft begins in P-mode by
default. To switch ight modes, rst go to Operation View in DJI Agras, tap
, then , and enable
“Enable Attitude Mode” in Advanced Settings. After enabling attitude mode, toggle the switch to P and
then to A to switch the ight mode to Attitude mode.
The aircraft still begins in P-mode by default after powering on, even though A-mode was enabled in
the app beforehand. When A-mode is required, toggle the Flight Mode switch as mentioned above after
powering on the remote controller and aircraft.
RTH Button
Press and hold the RTH button to bring the aircraft back to the last recorded home point. The LED
around the RTH Button blinks white during RTH. Users can control aircraft altitude while it ies to the
home point. Press this button again to cancel RTH and regain control of the aircraft.
Loading ...
Loading ...
Loading ...