Loading ...
Loading ...
Loading ...
47
7. The appliance will calculate the approximate end
time. The end time is different for different quantities
of food, set oven temperatures and function modes.
NOTE: The estimated end time will be displayed after
approximately 30 minutes.
NOTE: The Food Probe temperature will not be displayed
until the oven is at the desired temperature. Once the oven
is at the desired temperature, the Food Probe temperature
will cycle between the desired food core temperature and
the actual food core temperature.
actual core
temperature
desired food core
temperature
NOTE: The end time/cook time function cannot be set
whilst using the Food Probe function.
8. When the food is at the desired food core
temperature, an audible signal will sound for 2
minutes. To stop the signal, press the
symbol on
the control panel.
9. Remove the Food Probe plug from the socket and
remove the food from the oven.
NOTE: All meat/fish/poultry should be rested,
covered for at least 10 minutes.
CAUTION
Always check if food is cooked throughout
before eating.
WARNING
After use, always remove the Food Probe from the
oven cavity.
WARNING
The Food Probe is hot. There is a risk of burns.
Be careful when you remove the tip and plug of the
Food Probe.
To change the desired food core temperature during
cooking, press and hold the
and at the same time.
To cancel the Food Probe operation, simply unplug the
probe from the socket.
USING THE FOOD PROBE:
MODEL EVEP614
1. Turn function knob to the desired function
NOTE: The food probe will only work with the
following functions.
• Fan Bake
• Bake + Steam
• Bake
• Pastry
• Pizza
• Fan grill
2. Set the temperature using the temperature selector
knob.
3. Put the tip of food probe into the centre of the food,
with at least 75% of the probe inserted into the food,
and then place food into the oven.
4. Put the plug of the Food Probe into the socket on the
top right hand corner of the front frame. Ensure plug
is fully inserted into the socket. The food probe icon
and set temperature begin flashing. While the display
is flashing, the food probe set temperature can be set
using the temperature selector knob.
5. Touch the °C symbol to toggle through oven
temperature – oven set temperature – Food Probe
temperature – Food Probe set temperature. The oven
set temperature and the Food Probe set temperature
can be adjusted this way. The display will default to
the Food Probe temperature.
6. Once the food has reached the set temperature, the
oven will beep to notify. Touch any of the symbols to
stop beep.
7. Remove the Food Probe plug from the socket and
remove the food from the oven.
Loading ...
Loading ...
Loading ...