Loading ...
Loading ...
Loading ...
35
USING THE APPLIANCE
Cooking with the timer
The oven is equipped with a programmable controller that
can be used to turn the oven on and off automatically. The
‘cook time’ controls are used to automatically turn the oven
off after a set amount of time. The ‘Delay End’ controls are
used to set the time of day you want the cooking cycle
to finish.
Setting the cook time
1. Select the desired oven function and
cooking temperature.
2. Touch the ‘cook time’
symbol as often as
necessary (or hold), until the desired cook time has
been set.
3. Touch ‘OK’ or after 8 seconds from the last time
adjustment the oven will start cooking and the ‘cook
time’ display will countdown to zero.
4. The oven will turn off and beep when the ‘cook time’
display reaches zero.
IMPORTANT
• When you use the ‘cook time’ function, the
‘Finishes at’ display activates and tells you
what time of day the oven will turn off (based
on the set cook time).
• During cooking, you can adjust the cook
time with the ‘cook time’
or symbols for
better cooking performance.
• When the cook time has elapsed, an audible
signal will sound for 2 minutes, the oven will
switch off and COOKING FINISHED will
be displayed.
• To stop the audible signal, press any of the
symbols on the control panel.
• If you wish to cook a bit longer, press the
‘cook time’
symbol for each additional
minute you require. The oven automatically
reverts to the function and temperature
previously programmed. This feature is
available for 10 minutes after cooking has
finished. After that, the oven automatically
switches off.
• When using the Food Probe (where
applicable), the duration and end time
functions do not operate.
Setting the delay end time
The delay end function can be used to switch the oven on
and off at a specific time during the day.
1. Check the clock displays the correct time of day.
2. Select the desired oven function and
cooking temperature.
3. Set the required cook time.
4. Touch the ‘delay end’ symbol
to move the
end time.
5. Touch ‘OK’ or after 8 seconds from the last time
adjustment the SET icon will light and the oven is now
programmed. The oven will start its cooking cycle to
finish at the set ‘end time’.
6. When the oven has finished cooking, cook time can
be extended or the beeper turned off just as in ‘cook
time’ mode.
7. Touch the ‘delay end’ symbol to move the end
time forward.
8. Touch ‘OK’ or after 8 seconds from the last time
adjustment the SET icon will light and the oven is
now programmed.
The oven will commence its cooking cycle to finish at the
set ‘end time’.
Loading ...
Loading ...
Loading ...