D-Link DAP-2020 User Manual

Loading ...

54D-Link DAP-2020 User Manual

Section 3 - Conguration

Save to Local

Hard Drive:

Upload from

Local Hard Drive:

Restore to

Factory Default:

Reboot the

Device:

Use this option to save the current access point

conguration settings to a le on the hard disk of the

computer you are using. Click the Save button. You will

then see a le dialog where you can select a location

and le name for the settings.

Use this option to load previously saved access

point conguration settings. Click Browse to nd a

previously saved conguration le. Then, click the

Upload Settings button to transfer those settings to

the access point.

This option will restore all conguration settings back

to the settings that were in eect at the time the access

point was shipped from the factory. Any settings that

have not been saved will be lost, including any rules

that you have created. If you want to save the current

access point configuration settings, use the Save

button above.

Note: Restoring the factory default settings will not reset

the Wi-Fi Protected Status to Not Congured.

Click to reboot the access point.

System

Loading ...

D-Link DAP-2020 Wireless N Access Point