D-Link DAP-2020 User Manual

Loading ...

35D-Link DAP-2020 User Manual

Section 3 - Conguration

Enable Wireless:

Wireless Mode:

Wireless Network

Name:

802.11 Mode:

Wireless Channel:

Enable Auto Scan:

Channel Width:

Visibility Status:

Remote AP MAC:

Bridge Security:

Select this to turn the Wi-Fi module on and o. Use the

drop-down box to select if you want to use a schedule.

Click Add New to add or change a schedule.

Select Bridge with AP from the drop-down menu.

The Wireless Network Name is a unique name that

identies a network. All devices on a network must share

the same wireless network name in order to communicate

on the network. If you decide to change the wireless

network name from the default setting, enter your new

wireless network name in this eld.

Select the appropriate 802.11 mode based on the wireless

clients in your network. The drop-down menu options are

802.11n Only, Mixed 802.11n and 802.11g, or Mixed

802.11n, 802.11g and 802.11b.

All devices on the network must share the same channel.

The Auto Channel Scan setting can be selected to allow

the DAP-2020 to choose the channel with the least

amount of interference.

Select the appropriate channel width between 20MHz

or Auto 20/40MHz from the drop-down menu.

Check the box if you do not want the SSID to be broadcast by the DAP-2020. This prevents the SSID from being seen by site survey

utilities, so any wireless clients will have to be pre-congured with the SSID of the DAP-2020 in order to connect to it.

Enter the MAC addresses of the APs in your network that will serve as bridges to wirelessly connect multiple networks.

Select None to disable encryption to across the network. Select WEP 64-bits or WEP 128-bits to limit communication to only those

devices that share the same WEP settings. Select WPA-PSK or WPA2-PSK to secure your network using a password and dynamic key

changes (No RADIUS server required).

Bridge with AP Mode

Note: The Bridge with AP mode is not completely specied in the Wi-Fi or IEEE standards. This mode can work with other DAP-2020 units. Communication with other APs (even other

D-Link APs) is not guaranteed.

DAP-2020

Loading ...

D-Link DAP-2020 Wireless N Access Point

User Manual - Page 35