D-Link DAP-2020 User Manual

Loading ...

40D-Link DAP-2020 User Manual

Section 3 - Conguration

PPTP

Choose PPTP (Point-to-Point Tunneling Protocol) if your ISP uses a PPTP connection. Your ISP will provide you with a username

and password. This option is typically used for DSL services.

My IP Address:

Subnet Mask:

Gateway IP address:

Server IP Address:

Password:

MTU Size:

Attain

DNS Automarically:

Set DNS Automatically:

DNS Servers:

Clone MAC Address:

Enter the IP address (Static PPTP only).

Enter the subnet mask.

Enter the Gateway IP address.

Enter the Server IP Address provided by your

ISP.

Enter your PPTP username.

Enter your PPTP password and then retype

the password in the next box.

You may need to change the MTU (Maximum

Transmission Unit) for optimal performance

with your specic ISP. The default MTU size

is 1400.

Select this option if you want the DAP-2020

get DNS server IP address automatically.

Select this option if you want to manually

enter the DNS Server IP address(es). Fields to

enter the Primary and Secondary DNS server IP addresses will appear after you select this option.

Enter the Primary and Secondary DNS (Domain Name System) server IP address assigned by your ISP.

The default MAC address is set to the MAC address on the AP (Access Point). You can click the Clone Your PC’s MAC Address

button to replace the AP’s MAC address with the MAC address of your Ethernet card. It is not recommended that you change

the default MAC address unless required by your ISP.

Loading ...

D-Link DAP-2020 Wireless N Access Point