D-Link DAP-2020 User Manual

Loading ...

32D-Link DAP-2020 User Manual

Section 3 - Conguration

Enable Wireless:

Wireless Mode:

Site Survey:

Wireless Network

Name:

802.11 Mode:

Enable Auto

Channel Scan:

Wireless Channel:

Channel Width:

Visibility Status:

Wireless Security

Mode:

Check the box to enable the wireless function. If you do

not want to use wireless, uncheck the box to disable all

the wireless functions. You may also set up a specic time

range (schedule). Select a schedule from the drop-down

menu or click Add New to create a new schedule.

Select Repeater from the drop-down menu.

Click Site Survey to display a list of wireless networks

in your area. You may select the wireless access point

to connect to.

Enter the SSID of the access point you want to repeat the

signal of. If you do not know for sure, click Site Survey

and select it from the list, if available.

Select the appropriate 802.11 mode based on the

wireless clients in your network. The drop-down

menu options are 802.11n Only, Mixed 802.11n and

802.11g, or Mixed 802.11n, 802.11g and 802.11b.

The Auto Channel Scan setting can be selected to allow

the DAP-2020 to choose the channel with the least

amount of interference.

The channel will automatically change to the channel of the AP you are connected to.

Select the appropriate channel width between 20MHz or Auto 20/40MHz from the drop-down menu.

Check the box if you do not want the SSID to be broadcast by the DAP-2020. This prevents the SSID from being seen by site survey

utilities, so any wireless clients will have to be pre-congured with the SSID of the DAP-2020 in order to connect to it.

Select a wireless security setting. Options are None, WEP, WPA, or WPA2. See the Wireless Security section in this manual for a detailed

explanation of the wireless security options.

Repeater Mode

DAP-2020

Loading ...

D-Link DAP-2020 Wireless N Access Point