Loading ...
Loading ...
Loading ...
48D-Link DAP-2020 User Manual
Section 3 - Conguration
Port Forwarding (WISP modes only)
Check the box to congure a port forwarding rule.
Enter a name for the rule. You can select an
application name from the Application Name drop-
down menu. Click the << button to ll in the Name
eld with the application name that you selected.
Enter the IP address of the computer on your local
network that you want to allow the incoming
service to.
Enter the port or ports that you want to open. If
you want to open one port, enter the same port in
both boxes.
Select TCP, UDP, or Both.
Port Forwarding
Rules:
Name:
IP Address:
Start/End Ports:
Trac Type:
This function is available if your DAP-2020 is in the WISP Client Router or WISP Repeater mode. This feature allows you to open
a single port or a range of ports. Click Save Settings and the port forwarding rule will be put into the Port Forwarding List.
Loading ...
Loading ...
Loading ...