Loading ...
Loading ...
Loading ...
34D-Link DAP-2020 User Manual
Section 3 - Conguration
Enable Wireless:
Wireless Mode:
Wireless Network
Name:
802.11 Mode:
Wireless Channel:
Enable Auto
Channel Scan:
Channel Width:
Visibility Status:
Remote AP MAC:
Bridge Security:
Select this to turn the Wi-Fi module on and o. Use the
drop-down box to select if you want to use a schedule.
Click Add New to add or change a schedule.
Select Bridge from the drop-down menu.
The Wireless Network Name is a unique name that
identies a network. All devices on a network must share
the same wireless network name in order to communicate
on the network. If you decide to change the wireless
network name from the default setting, enter your new
wireless network name in this eld.
Select the appropriate 802.11 mode based on the wireless
clients in your network. The drop-down menu options are
802.11n Only, Mixed 802.11n and 802.11g, or Mixed
802.11n, 802.11g and 802.11b.
All devices on the network must share the same channel.
The Auto Channel Scan setting can be selected to allow
the DAP-2020 to choose the channel with the least
amount of interference.
Select the appropriate channel width between 20MHz
or Auto 20/40MHz from the drop-down menu.
Select the transmission rate. It is strongly suggested to use the Auto setting for optimal performance.
Enter the MAC addresses of the APs in your network that will serve as bridges to wirelessly connect multiple networks.
Select None to disable encryption to across the network. Select WEP 64-bit or WEP 128-bit to limit communication to only those
devices that share the same WEP settings. Select WPA-PSK or WPA2-PSK to secure your network using a password and dynamic key
changes (No RADIUS server required).
Bridge Mode
Note: The Bridge mode is not completely specied in the Wi-Fi or IEEE standards. This mode can work with other DAP-2020 units. Communication with
other APs (even other D-Link APs) is not guaranteed.
DAP-2020
Loading ...
Loading ...
Loading ...