D-Link DAP-2020 Wireless N Access Point

19D-Link DAP-2020 User Manual

Section 2 - Installation

In the WISP Repeater mode, the DAP-2020 wirelessly connects to a WISP (Wireless Internet Service Provider) AP. In this mode,

the DAP-2020 also acts as a router for both wireless and wired clients on your LAN. The WISP Repeater mode provides NAT

(Network Address Translation) and a DHCP server to generate IP addresses for both wireless and wired clients. NAT and the

DHCP server allow many computers to share the same wireless Internet connection.

If you are a WISP subscriber and want to use your WISP account in your house, but the signals from the outdoor WISP AP are

AP and provide access to wireless clients in your house. Using this mode, wireless as well as wired clients can connect to the

outdoor WISP AP through the DAP-2020.