D-Link DAP-2020 User Manual

Loading ...

33D-Link DAP-2020 User Manual

Section 3 - Conguration

Wireless Mode:

Site Survey:

Wireless Type:

Wireless Network

Name:

802.11 Mode:

Wireless Channel:

Enable Auto

Channel Scan:

Channel Width:

Visibility Status:

Wireless MAC

Clone:

Wireless Security

Mode:

WPS:

Select Wireless Client Mode from the drop-down menu.

Click Site Survey to display a list of wireless networks in your

area. You may select the wireless access point to connect to.

Select Infrastructure if connecting to an access point or

wireless router, or select Ad-Hoc if connecting to another

wireless client.

Enter the SSID of the access point you want to repeat the signal

of. If you do not know for sure, click Site Survey and select it

from the list, if available.

Select the appropriate 802.11 mode based on the wireless

clients in your network. The drop-down menu options are

802.11n Only, Mixed 802.11n and 802.11g, or Mixed

802.11n, 802.11g and 802.11b.

The channel will automatically change to the channel of the

AP you are connected to.

The Auto Channel Scan setting can be selected to allow the

DAP-2020 to choose the channel with the least amount of

interference.

Select the appropriate channel width between 20MHz or Auto

20/40MHz from the drop-down menu.

Check the box if you do not want the SSID to be broadcast by the DAP-2020. This prevents the SSID from being seen by site survey

utilities, so any wireless clients will have to be pre-congured with the SSID of the DAP-2020 in order to connect to it.

You can clone the wireless MAC address to connect the device.

Select a wireless security setting. Options are None, WEP, WPA, or WPA2. See the Wireless Security section in this manual for a detailed

explanation of the wireless security options.

Select enable if you want to congure the DAP-2020 with Wi-Fi Protection setup.

Wireless Client Mode

DAP-2020

Loading ...

D-Link DAP-2020 Wireless N Access Point

User Manual - Page 33