Loading ...
Loading ...
Loading ...
Oven Operation, Baking or Roasting
To set oven on radiant or convection bake:
1. Place oven racks on proper rack positions. (See page 15.)
2. Touch BAKE RAD or BAKE CONV PAD.
Indicator Words ENTER, CONVCT or RAD, BAKE and TEMP will blink. All O's
will be displayed. [_.TEeCO_ 0 _P] Display
3. Touch NUMBER PADS for oven temperature desired by touching numbers, in
order.
For example: touch 3 2 5 for 325°F.
(Allowable range of temperature that may be set is 100° to 525°F.)
ENTER CONVCT BAKE _P ]
3 2 5 Display
4. Touch START PAD.
Display will show a rise in increments of 5° until programmed temperature is
reached. When Indicator Word TEMP stops blinking, the oven will be preheated
and programmed oven temperature will be displayed. To time length of cooking
period, use MINUTE TIMER. (See page 11.)
IMPORTANT: Whenever TEMP is blinking, the oven is heating. If TEMP does
not blink, oven was already hot from previous use and is preheated.
To recall temperature set: Touch appropriate BAKEPAD.Temperature will be
briefly displayed, then will automatically return to on-going program.
To change temperature set: Repeat Steps 2-4, entering new temperature in
Step 3.
5. Touch CANCEL-OFF PAD to turn oven off at end of baking.
Display will return to time of day.
NOTE: A cooling fan may be heard during oven use. This occurs anytime
cooling of the electronic control panel is required. Fan may come on any
time during use of the oven and may continue for a short time after the
oven has been turned off.
10
Loading ...
Loading ...
Loading ...