Loading ...
Loading ...
Loading ...
En
32
Auto standby function
When the auto standby function is turned on, the power is automatically
set to standby mode after four hours have passed with all of the follow-
ing conditions met.
— None of this unit’s buttons or controls are operated.
— That this unit’s channel level indicator is not lit.
— That the playback function is not operating.
— That no PRO DJ LINK connections are made.
— That no USB device is connected to the USB device insertion slot
(Type A terminal) on the unit’s top panel.
— That no computer is connected to the [ USB] terminal (Type B
terminal) on the unit’s rear panel.
! When the [MASTER REC (WAKE UP)] button is pressed, standby
mode is canceled.
!
This unit is shipped with the auto standby function turned on. If you
do not want to use the auto standby function, set [AUTO STANDBY]
to [OFF].
Language settings
Select the language in which the track names and messages are dis-
played on the screen.
! When the language is changed, the messages on the main unit
display are displayed in the selected language.
! To display the information such as track names written in local
character codes other than Unicode, select the language in the
[LANGUAGE] setting.
Correcting the alignment of the
touch display
The alignment of the touch display can be corrected by selecting
[TOUCH DISPLAY CALIBRATION] in the settings in the [UTILITY]
screen.
!
If [+] does not move when you touch it, touch it a little longer.
! This unit has been shipped after calibration. Set the calibration if the
unit does not respond to your touch properly.
! When setting the calibration, do not use a pointed object like a ball-
point pen.
Setting preferences
Option settings Setting ranges Descriptions
LOAD LOCK
LOCK/UNLOCK* Sets whether to disable or enable the loading of new tracks during playback.
NEEDLE LOCK
LOCK*/UNLOCK For details, see Playing from the position touched on the waveform on page
19 .
QUANTIZE BEAT VALUE
(DECK)
1/8, 1/4, 1/2, 1*
Changes the beat size of QUANTIZE. The setting can also be changed in the
[SHORTCUT] screen.
HOT CUE AUTO LOAD ON/rekordbox SETTING*/OFF
For details, see Calling out hot cues automatically when tracks are loaded on
page
17 .
HOT CUE COLOR
ON/OFF*
The lighting color of the [HOT CUE] (A to H) buttons can be changed.
For details, see Lighting colors of performance pads on page
17 .
AUTO CUE LEVEL
–36 dB/–42 dB/–48 dB/–54 dB/–60 dB/–66 dB/–72 d
B/–78 dB/MEMORY*
Sets the auto cue level.
= For details, see Changing the auto cue level on page 22 .
SLIP FLASHING
ON*/OFF
Sets whether or not the indicators of buttons, etc., for which the slip function is
activated when the [SLIP] button is pressed flash.
ON AIR DISPLAY
ON*/OFF Sets whether to display/hide the [ON AIR DISPLAY].
VINYL SPEED ADJUST
TOUCH&RELEASE*/TOUCH/RELEASE
=
For details, see Adjusting the playback and stopping speeds on page 15 .
AUTO PLAY MODE
ON/OFF*
=
For details, see Auto-play mode on page 31 .
EQUALIZER CURVE
EQUALIZER*/ISOLATOR Sets the EQ/ISO (HI, MID, LOW) control function to [EQUALIZER] or [ISOLATOR].
CHANNEL FADER
CURVE
[
]CURVE1/[ ]CURVE2*/[ ]CURVE3
Sets the channel fader curve.
=
For details, see Mixer/effect section on page 27 .
MASTER ATTENUATOR.
+12 dB, –6 dB, 0 dB* Sets the master output attenuator.
BOOTH MONIITOR
ATTENUATOR.
+12 dB, –6 dB, 0 dB* Sets the BOOTH output attenuator.
HEADPHONES MONO
SPLIT/STEREO
MONO SPLIT/STEREO*
Switches the headphones output between MONO SPLIT and STEREO.
For details, see Monitoring sound with headphones on page
28 .
MIXER MODE
XDJ-RX2/MIDI CONTROL*
=
For details, see Changing the [MIXER MODE] on page 33 .
LANGUAGE
— Sets the main unit display’s language.
LCD BRIGHTNESS 1, 2, 3*, 4, 5
Sets the main unit display’s brightness.
SCREEN SAVER
ON*/OFF
When set to [ON], the screen saver starts up in any of the following cases:
!
When no track is loaded in this unit for over 5 minutes
! When no operation is performed for over 100 minutes while in the pause or cue
standby mode or when [END] is displayed on the deck display section.
TOUCH DISPLAY
CALIBRATION
— For details, see Correcting the alignment of the touch display on page
32 .
AUTO STANDBY
ON*/OFF
=
For details, see Auto standby function on page 32 .
VERSION No.
— Displays this unit’s software version.
*: Setting upon purchase
Loading ...
Loading ...
Loading ...