Loading ...
Loading ...
Loading ...
En
19
Part names and functions
4 Release the performance pad.
Normal playback of the sound that was playing in the background
resumes when you release your finger from the performance pad before
4 beats have elapsed from the starting position of the hot cue.
Slip reverse
1 Press the [SLIP] button.
The mode switches to slip mode.
2 Press and hold down the [DIRECTION, REV] button
during playback.
The [DIRECTION, REV] button lights up and reverse playback starts.
Normal playback continues in the background even during reverse
playback.
The [SLIP] button flashes in beat with the sound playing in the
background.
!
Slip reverse playback is automatically canceled after 8 beats have
elapsed from the position at which the [DIRECTION, REV] button
is pressed. Playback returns to normal after reverting to the back-
ground and the [DIRECTION, REV] button turns off.
! If the [DIRECTION, REV] button is released before 8 beats have
elapsed, slip reverse playback is canceled, and the normal playback
of the sound that was playing in the background resumes.
Canceling slip mode
Press the [SLIP] button.
Slip mode is canceled.
! Slip mode is also canceled when a track is loaded.
Slip looping
There are the following ways to use slip loop.
When using the [LOOP IN/4BEAT (IN ADJUST)]
button or [LOOP OUT (OUT ADJUST)] button
1 Press the [SLIP] button.
The mode switches to slip mode.
2 Press the [LOOP IN/4BEAT (IN ADJUST)] button, then
press the [LOOP OUT (OUT ADJUST)] button.
Loop playback starts.
Normal playback continues in the background even during loop
playback.
The [SLIP] button flashes in beat with the sound playing in the
background.
! Loops of over 8 seconds cannot be set.
! The same operation is performed when the [LOOP IN/4BEAT
(IN ADJUST)] button is pressed for over 1 second and a loop is set.
3 Press the [RELOOP/EXIT] button.
Looping is canceled, and normal playback of the sound that was playing
in the background resumes.
When using PAD MODE (BEAT LOOP)
1 Press the [SLIP] button.
The mode switches to slip mode.
2 Press the [BEAT LOOP] button to switch to the beat
loop function.
3 Press the performance pad corresponding to the
number of beats you want to set.
Loop playback for which a loop has been set automatically begins.
Normal playback continues in the background even during loop
playback.
The [SLIP] button flashes in beat with the sound playing in the
background.
! You can specify 1/16 beat, 1/8 beat, 1/4 beat, 1/2 beat, 1 beat, 2 beats,
4 beats, and 8 beats.
! If a number of beats for which the length of the loop will exceed 8
seconds has been selected, loop playback will not begin.
4 Press the [RELOOP/EXIT] button.
Looping is canceled, and normal playback of the sound that was playing
in the background resumes.
When using PAD MODE (SLIP LOOP)
If a performance pad is kept pressed, the SLIP LOOP operation is per-
formed regardless of whether slip is turned on or off.
1 Press the [SLIP LOOP] button to switch to the slip loop
function.
2 Press and hold the performance pad corresponding to
the number of beats you want to set.
Loop playback for which a loop has been set automatically begins.
Normal playback continues in the background even during loop
playback.
If a number of beats for which the length of the loop will exceed 8 sec-
onds has been selected, loop playback will not begin.
When a loop is set while slip is turned on, the [SLIP] button flashes in
beat with the sound playing in the background.
3 Release the performance pad.
Normal playback of the sound that was playing in the background
resumes.
Playing from the position touched on the
waveform
Touch the waveform with your finger to easily play the audio starting
from the position touched. Keep touching the waveform and move your
finger to move to the desired position.
The operation state of the search by touching the waveform can be
changed from the settings of the [UTILITY] screen.
When [NEEDLE LOCK] in the [UTILITY] screen is set to [LOCK]
— Operation is possible when paused or while the jog dial is being
pressed with the mode set to VINYL
When [NEEDLE LOCK] in the [UTILITY] screen is set to [UNLOCK]
— Operation is possible regardless of whether in the playback or
paused state.
The playback point moves to the touched point on the display.
! If you move your finger quickly, the playing address display may not
be shown properly.
Using the sync function
This function can be used to automatically synchronize the tempo (BPM)
and beat positions on the left and right decks based on the tracks’ beat
grid information as analyzed with rekordbox.
! Music files must be analyzed with rekordbox beforehand in order to
use the SYNC function. For instructions on analyzing music files with
rekordbox, see the rekordbox user’s manual.
! The following describes the procedure for synchronizing the
[DECK 2] track with the [DECK 1] track.
Loading ...
Loading ...
Loading ...