Loading ...
Loading ...
Loading ...
9
MA/IT/DI/ML SERIES DOOR REMOVAL AND RE INSTALLATION
The DI and ML series of Glem and Emilia cookers have the latest oven door hinge design
technology from Glem Gas. For the removal and re-installation of the oven door with the
new hinges please follow these procedures.
TO RE-INSTALL THE DOOR
IMPORTANT Hold the door at an angle so there is a 150mm gap at the top.
Hook the hinges in first with the groove in the bottom of the hinge sitting on the roller
housing.
Once the hinges are located properly fully open the door again and unlock the hinges
and close the door.
NOTE - ONCE YOU HAVE INSTALLED THE DOOR IF IT DOES NOT OPEN PROPERLY
REPEAT THE PROCEDURE. DO NOT FORCE THE DOOR AT ANY TIME.
1. Open the door fully.
2. Rotate the hinge locking tab
usingyour finger or a small
screw driver.
3. Tab in locked position. Repeat
the procedure on each hinge.
4. Hold the door as shown.
Close the door until there is a gap
of about 150mm at the top and pull
in the direction of the arrows. The
most pull should be at the lower
part of the door.Do not force it.
OPEN
150 mm
LIFT UP
PULL
TO RE-INSTALL THE DOOR
NOTE - ONCE YOU HAVE INSTALLED THE DOOR IF IT DOES NOT OPEN PROPERLY REPEAT THE PROCEDURE. DO NOT
FORCE THE DOOR AT ANY TIME.
IMPORTANT Hold the door at an angle so there is a 150mm gap at the top.
Hook the hinges in first with the groove in the bottom of the hinge sitting on the roller housing.
Once the hinges are located properly fully open the door again and unlock the hinges and close the door.
DI/ML SERIES DOOR REMOVAL AND RE INSTALLATION
The DI and ML series of Glem and Emilia cookers have the latest oven door hinge design technology
from Glem Gas. For the removal and re-installation of the oven door with the new hinges please follow
these procedures.
Loading ...
Loading ...
Loading ...